What Is Angular Acceleration?
Angular acceleration (\alpha) measures how quickly an object's rotational speed changes. It is the rotational analog of linear acceleration: where linear acceleration describes change in straight-line velocity, angular acceleration describes change in angular velocity (\omega). It is expressed in radians per second squared (rad/s²) and is a key quantity in rotational dynamics, from spinning wheels and motors to gears and planetary motion.
How to Use This Calculator
Enter three values: the initial angular velocity (\omega_i), the final angular velocity (\omega_f), and the time (t) over which the change occurs. All angular velocities should be in radians per second and time in seconds. The calculator returns the average angular acceleration along with the total change in angular velocity. A negative result means the object is decelerating (slowing its rotation).
The Formula Explained
The equation is
Worked Example
A flywheel speeds up from 0 rad/s to 20 rad/s in 4 seconds. The change is Δ\omega = 20 - 0 = 20 rad/s. Dividing by time:
Key Terms & Variables
- Angular acceleration (\alpha, rad/s²) — the rate of change of angular velocity with time. A positive value means the rotation is speeding up; a negative value means it is slowing down (deceleration).
- Initial angular velocity (\omega_i, rad/s) — the rotational speed at the start of the time interval.
- Final angular velocity (\omega_f, rad/s) — the rotational speed at the end of the time interval.
- Change in angular velocity (Δ\omega, rad/s) — the difference Δ\omega = \omega_f - \omega_i; the numerator of the angular acceleration formula.
- Time (t, s) — the duration over which the change in angular velocity occurs.
- Radian — the SI unit of angle. One full revolution equals 2π radians (≈6.2832 rad), so the radian is dimensionless and angular acceleration carries units of 1/s² written as rad/s².
The defining relationship is \alpha = \dfrac{\omega_f - \omega_i}{t}, valid for constant (average) angular acceleration over the interval.
More Worked Examples
Example 1 — A decelerating wheel
A flywheel slows from \omega_i = 30 rad/s to \omega_f = 10 rad/s over t = 5 s. Substituting into the formula:
The result is -4 rad/s². The negative sign confirms the wheel is decelerating.
Example 2 — Starting from an RPM value
A motor spinning at 120 RPM is brought to a complete stop in 8 s. First convert the initial speed to rad/s:
With \omega_f = 0 and t = 8 s:
So the angular acceleration is -1.5708 rad/s². Always convert RPM (or deg/s) to rad/s before applying the formula so the result is in proper SI units.
使用注意事項與精準校對原則（6 大核心守則）
📐 1. 嚴格對齊輸入量綱與單位
輸入各項數值時請務必確認量綱（例如小時、天數、金額、百分比），避免單位不匹配引發推算偏差。
🔒 2. 純前端本機毫秒級隱私保障
所有計算邏輯 100% 在您的終端瀏覽器內完成，資料絕不上傳伺服器，嚴格守護商業與個人隱私。
📊 3. 符合公認學術與產業計算模型
演算法嚴格遵循國際通用數學公式與標準計算模型，經多重情境交叉核對，數值嚴密精確。
📋 4. 一鍵複製與免登入 PDF 匯出
支援一鍵複製推算結果字串至剪貼簿，亦可直接點擊列印按鈕輸出純淨 PDF 工作報表。
🔄 5. 多情景敏感度動態對比
建議針對極端值與多組預期情景分別試算，觀察輸出數據的波動區間，輔助做出更穩健的決策。
🛡️ 6. 專業諮詢與日常參考免責聲明
本工具運算結果供日常排程、學業研習與事前參考之用，如涉及重大法規或投資決策請諮詢持證專家。